Featured Shaker Style Home Furniture
Please browse through these images of some pieces we have built for clients over the years. If you see something you would like to consider having built please contact us and we would be happy to provide a quote.
-
-
Drop Leaf Table & Shawl Back Side Chair set in Cherry wood / Fireside finish
-
-
Drop Leaf Table & Shawl Back Side Chair set in Cherry wood / Fireside finish
-
-
Drop Leaf Table & Shawl Back Side Chair set in Cherry wood / Fireside finish
-
-
Custom Office Set in Tiger Maple with Cinnamon finish. Drawer Bank in foreground is a file cabinet.
-
-
Round Extension Table built of Tiger Maple wood in our Honey finish
-
-
Round Extension Table built of Tiger Maple wood in our Honey finish
-
-
Custom Kitchen Pantry Cupboard built in Cherry wood in our Amber finish
-
-
Custom Kitchen Pantry Cupboard built in Cherry wood in our Amber finish
-
-
Dresser Desk in Satin Black paint
-
-
Dresser Desk in Satin Black paint
-
-
Dresser Desk in Satin Black paint
-
-
Dresser Desk Interior in Fireside on Tiger Maple wood
-
-
Dresser Desk interior in Fireside on Tiger Maple wood
-
-
Slant Front Desk built out of Tiger Maple wood in our Cinnamon finish
-
-
Interior of a Slant Front Desk built out of Tiger Maple wood in our Cinnamon finish
-
-
Dovetailed case corner on a Slant Front Desk built of Tiger Maple in our Cinnamon finish
-
-
Interior of a Slant Front Desk built of Tiger Maple in our Cinnamon finish
-
-
Low Bar Stool for a 36″ high counter. Tiger Maple wood in our Fireside finish with Black and Beige seat woven in a Diamond Pattern
-
-
Set of Low Bar Stools for a 36″ high counter. Tiger Maple wood in our Fireside finish with Black and Beige seat woven in a Diamond Pattern
-
-
Low Bar Stool for a 36″ high counter. Tiger Maple wood in our Fireside finish with Black and Beige seat woven in a Diamond Pattern
-
-
Chimney Cupboard with a glass door built in Sugar Pine wood in our Honey finish
-
-
Custom Storage cabinet built of Tiger Maple in our Cinnamon finish
-
-
Custom Pie Safe built of Tiger Maple wood in our Cinnamon finish
-
-
-
2 Door Credenza built out of Cherry wood in our Amber finish
-
-
Extension Table built out of Tiger Maple wood in our Cinnamon finish
-
-
Extension Table built out of Tiger Maple wood in our Cinnamon finish
-
-
Extension Table built out of Tiger Maple wood in our Cinnamon finish with a set of Shawl Back Side Chairs and Elder’s Arm Chairs
-
-
Extension Table built out of Tiger Maple wood in our Cinnamon finish with a set of Shawl Back Side Chairs and Elder’s Arm Chairs
-
-
-
-
Dropleaf Card Table & 3 Slat Side Chair in Cherry wood in our Amber finish. Chair seat is woven with Dark Blue & Beige Shaker Tape
-
-
Delicate “Rule Joint” on the top of a Cherry Drop Leaf Table in our Fireside finish
-
-
Custom Clothes Trees built out of Tiger Maple, Cherry and Ebony woods
-
-
Custom Clothes Trees built out of Tiger Maple, Cherry and Ebony woods
-
-
Cherry wood Sweater Cabinet in our Cinnamon finish
-
-
Custom double pedestal Slant Front Desk built out of Tiger Maple wood in our Cinnamon finish
-
-
Interior of a Custom double pedestal Slant Front Desk built out of Tiger Maple wood in our Cinnamon finish
-
-
-
-
-
4 Drawer Low Dresser in Satin Black paint
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CRATING & SHIPPING OF ONE OF OUR LARGEST PIECES…some fine Pennsylvania Cherry wood & craftsmanship gets packed up for the journey to a Redwood forest in California
A good client from the West coast fell in love with this 16 Drawer Case while visiting our showroom & workshop recently, we were asked to get it safely to their in California just South of the Mendocino National Forest which is North of San Francisco...
The piece is made out of Pennsylvania Cherry wood and weighs a lot...
Josh is shown here starting the wooden crate that we will use to ship this fine piece of furniture...
The same cabinetmakers that built our furniture built the shipping crates that protect our pieces while in transit...
We start with a base that is set on blocks to allow lifting with a forklift...
All of our crates are put together with screws to allow our receiving clients to easily take them apart to recycle the components...
It also makes it very easy to open the crate to remove the contents...
Dressers are shipped standing up, edges of drawers are all wrapped with stretch tape to avoid rubbing case...
Any loose hardware such as keys and tether fasteners are safely packed inside...
Here the panels for the crate front & back are being joined with a pneumatic corrugated fastener gun...
Sheets needed were larger than your standard 4 x 8 plywood, we needed to make them larger...
All of our pieces are branded, signed & dated by the cabinetmaker that made it...
Certain taller pieces are fit with a tether cable for added safety...
After individually wrapping drawer edges they are all secured into the case with more stretch wrap...
Pretty sure Josh is getting dizzy here...
Ready to insert into the crate...
1" thick rubber cushions are located before we set the furniture in place...
We use 3/4" thick plywood to crate our furniture, we have found that it protects our pieces from forklift abuse and the like very well...
Here the case is in place and we are now securing the rear and side panels first...
Rubber cushion is used as a shock absorber for the truck ride West, it is actually stable mat that is used in horse & cow stables...
Here foam blocks are being inserted to fill gaps and keep furniture from shifting in crate...
Packing is very light, highly protective...
We use it only where it is needed so there is not much to dispose of or recycle when unpacked...
This is why the stretch wrap was used to keep the drawers from opening....
Fastening the top and front panels...
After it is built and closed we go ever edges with a scrub plane to get rid of sharp crate edges...
Crates are then labeled and weighed...
The shipping company is contacted and we are ready to ship...
A Bill of Lading is prepared and tracking information is obtained when the crate is picked up...
And off we go to California, the cross country trip will take about 5 or 6 days...
CREATING HEIRLOOMS FROM A FAMILY WALNUT TREE…another California friend seeks our shop out to turn her Father’s cherished East Coast American Black Walnut slabs into fine furniture to ship West
We were commissioned recently to turn these Walnut slabs into some furniture for a client from the Santa Maria California area...
These "Live-Edge" slabs had been sawed & stored by her Father decades ago...
The tree once grew in the Towanda region of Pennsylvania, just South of the New York border...
After inheriting these boards when her Father passed away, Elizabeth decided to keep these boards in her California home, in furniture form...
Slabs were from a very nice crotch section and we worked with this while laying the project out...
The slabs were over 2" thick and could be split for certain parts, note the "Book-Matched" parts in some following images...
Re-sawing on the bandsaw...
Elizabeth visited during the early stages of construction...
This is the leg assembly for the base of a table that was ordered...
Many parts, there were two pieces of furniture ordered by her to crafted & shipped West...
Elizabeth was very interested in learning anything she could from us about wood and how we would work with hers...
AJ was the cabinetmaker for the project...
Parts on the bench, the piece of Walnut on the bench in the foreground still has bark on the edges, this is referred to as being "Live-Edge" and is very popular in furniture once again...
Boards being glued up in a press...
More parts, some with tenons...
Turning the legs for the table on the lathe...
The knobs were also turned, every piece of wood used in this project came from the 3 slabs provided...
Assembly starting on the table base...
From this cut we can guesstimate the age of the tree when it was felled...
Desk assembly required four hands...
Delicate "Rule Joint" on the table top provides a very refined appearance when the leaf is up or down...
This is the table, it is one of our standard 2 Drawer Drop Leafs...
We dovetail all of our drawers in all four corners...
The "Rule Joint" with the leaf up...
Underside of the table, note the raised drawer bottom & special drop-leaf hinges...
The small piece protruding through the apron next to the hinge pulls out to support the leaves, there is one of these pull-outs located under each leaf...
We brand, sign & date all of our work...
Another drawer bottom view...
A nylon glide is attached to the bottom of table legs to protect the leg and the floors it sits on...
Top of desk with lid closed...
Pull-outs to support desk lid when opened...
This is one of our standard Kentucky Slant Front Desks that Libby commissioned us to create with her wood...
Here both pieces are ready for finish...
Elizabeth selected a wax finish, here Rolando is working his magic on the table...
Wax finish really brought out the beauty of this fine walnut...
Desk pull-out close up...
Some of these grain features were selected by Elizabeth while we were examining the uncut slabs...
Very petite table is a popular piece for us, we build many of them...
Nicely finished and ready to pack up for the trip...
All loose or movable parts are secured with stretch wrap, the crate they will be shipped in is in background...
Lifting the pieces into the crate...
Strategically placed foam blocks are used to prevent the contents from shifting during transit...
Josh is shown securing the lid of the crate down...
Soon this will be picked up by the freight company and shipped to our client, the cross country journey will take about 5 days...
